Home
Product Catalog
CNC Router Machine
CO2 Laser Cutting Machine
Fiber Laser Machine
Machine Parts
Other Machines
Contact Us

Product Catalog 

 

4x14m Gantry CNC Plasma Flame Metal Cutting Machine cutter (3000 x 12000mm)

Model No.︰-
Brand Name︰Gauss
Country of Origin︰-
Unit Price︰US $ 7100 / pc
Minimum Order︰1 pc
Share on:

 Total 29 Related Items 
Prev2021222324Next

Product Description

1.Equipment function:

(1)Cutting object:sheets and plates

(2)Cutting material:Stainless steel, carbon steel, other non-ferrous metal .

(3) Cutting technology :Cut any shape on a plate,cut off,

 

 

2.Technical index:

No.

Items

Parameters

1

Effective cutting range

3000*12000mm

2

Flame torch

One group

3

Plasma torch

Two groups

4

Arc voltage increase

One

5

  Plasma power supply

Reserve

6

Cutting torch lifting distance

200mm

7

Flame cutting speed

0-1000mm/min

10

Plasma cutting speed

0-6000mm/min

12

Automatic ignition device

One

13

Motor

Servo motor Panasonic

14

Controller

Shanghai Jiaoda

15

Drive mode

Bilateral drive

16

System console direction

According to user requirements

 

17

Transmission pipeline

Towline lateral, vertical towline

18

Auto-precision

≤±1.0mm

19

Longitudinal linear precision

±0.2mm/10m

20

Integrated precision machine
(to the right of integrated graphics shall prevail) length (four) 1000 x 1000
Scribing speed 500-800mm/min

 

21

Length (four)

±0.5mm

22

Diagonal error |AD-BC|

±0.5mm

23

Back to the origin of deviation

±0.2mm

24

Intersection deviation

±0.5mm

25

Inverse linear deviation

±0.2mm

26

Cutting surface quality (roughness) (optional δ = 25 plates)

Rz(um)=70+1.2a

Visual: Roughness 12.5

27

Squareness and inclination tolerances

μ(mm)=0.4+0.015a

Tools: angle ruler

28

Straight angle

4M × 20M square diagonal error

≦ ± 0.2 mm / 10m

29

Walks nonstraightness

Longitudinal ≦ ± 0.2mm / effective length

Transverse ≦ ± 0.2mm / effective length

30

Torch angle error

≦±0.5º

31

Equipment Noise

≤80 db

3.Working conditions:

4.1

Supply voltage / frequency

3×380v±10%/50Hz

220v±10%/50Hz

4.2

compressed air

Dry and oil-free; pressure: 0.8Mpa flow: 1 m3/h

4.3

Gas type

Propane, acetylene, propylene, natural gas.

4.4

ambient temperature

0-50 DEG C

4.5

relative humidity

<90% without condensation

4.6

Surrounding environment

No great impact within 5 meters of ventilation.

4.7

Earthquake grade

Fortification by grade 6

 

4.Buyer obligations:

machine tool installation site customer site requirements (by the customer before the arrival of equipment ready):

 

No.

Content

1

The following terms do not fall within the scope of supply, and the customer may configure them individually according to their own needs

1. the foundation for the installation of rails, such as heavy beams, cement concrete foundations, etc. (according to the manufacturer's basic drawings, requires the user to make it himself).

2. cutting platform (in accordance with the manufacturer's basic drawing requirements of the user to make their own).

The 3. longitudinal lines (dragging chain bracket provided by the manufacturer based requests made by the users themselves).

4. primary power supply and its side wiring (supplied by the manufacturer as requested).

5. primary gas supply (supplied by the manufacturer as requested).

2

Power supply capacity: no less than 12 KVA

3

Power supply requirements of numerical control system and electric control cabinet:

1. voltage AC220V single phase + 10%

2. frequency 50Hz

3. power 3 kW

Requirements for power supply of plasma cutting power:

1. voltage AC380V three-phase + 10%

2. frequency 50Hz

The 3. power is determined by the size of the plasma power source

Other requirements:

(1) the three-phase voltage stability is less than + 5%

(2) unbalance of three-phase power supply is less than 2.5%

(3) do not meet the above-mentioned power requirements, it is recommended to use the regulated power supply.

(4) the power supply voltage is not allowed to sudden jump and sudden power failure, otherwise it is easy to damage the equipment and CNC system;

(5) good grounding (earthing resistance is less than 10 ohms).

4

Flame cutting gas requirements:

Type of gas: acetylene, propane, propylene, natural gas.

Gas pressure 0.05-0.1MPa

Cutting oxygen pressure 0.5-0.8MPa

Preheating oxygen pressure 0.40.6MPa

5

Compressed air supply requirements:

(1) gas supply capacity: 4500L/H;

(2) air supply pressure: over 7MPA;

(3) the dew point temperature of less than 5 degrees Celsius, the oil content of less than 0.003ppm solid particles less than 0.01 microns

(4) recommend the use of oil-free air compressor, freeze dryer and precision filter (the system can not have rusty components), conditional increase of a gas tank.

6

Cutting plate: smooth, flat, rolled evenly, reaching ISO or domestic Baosteel standard.

7

Requirements for loading and landing of CNC cutting machines:

(1) temperature requirements: -10-50 DEG C (2) humidity requirements: <90% without condensation

(3) the site should fully meet the needs of equipment placement, it is recommended to cut off the plasma power supply, to avoid the interference of plasma power on the system.

8

Equipment operators should have high school or technical secondary school education level, should have the experience of operating computer and general CNC machine tools, equipment should be equipped with a programming computer.

  

 

 

8.After-sales service Guaranty

* The warranty provides shall be 12 months from the date of satisfactory installation of equipment for components/workmanship. During one year warranty period, the supplier shall be provide free repair service in case of failure due to defective part/ component and replace defective part/component free of cost.

* During the 1year warranty period, the Supplier shall be provide free repair service for failure not caused by personal factors (the local transport, Visa, air ticket, food, accommodation, translation, internet, communication and travel allowance etc for foreign users should be borne by the User. Such expenses are not included in the quotation) and free replacement for various parts damaged not due to personal factors (sent to foreign users by mail or express, express and the expense borne by buyers). For the repair for failure occurred not within the warranty period, certain charges will be collected.

* The NC system possesses the standard functions that meet the basic functions of the control system and optional functions needed for future expanded welding. The mechanical part adopts combined, replaceable and standardized structure. Through upgrading of software and hardware, and repair and replacement of mechanical unit, the equipment can maintain long term precision and normal work.

*ØSoftware upgrades and process improvements shall be provided free of cost by supplier to buyer periodically

5. Packing And Marking

Ø The supplier shall have the goods suitably packed and shall take measures to protect the goods from moisture, rain, rust, corrosion, shock, & any other hazard’s in export sea standard worthy palletized packing.

Ø The supplier shall mark the following on the four adjacent sides of each package of the goods with indelible paint in conspicuous printed words in the English language.

² Contract Number/Destination/Name Of Equipment And Item Number/Case No./Bale No./ G.W / N.W(KG)

Ø The following documents shall be enclosed in each package of the goods:

² Detailed packing list in 2 copies; Quality certificate in 2 copies;

² Technical documents for relevant equipment in one copy.

Ø Should the goods be damaged or lost due to supplier’s improper packing and / or inadequate protective measures before shipping, the supplier shall be responsible for the repair, replacement of compensation.

6.Other Description

Ø This agreement is annexure of the commercial contract, and have the same legal effect with commercial contracts;

Ø This Agreement entered into force upon signature by the relevant parties

Ø In case of other matters not covered, will be an amicable settlement to friendly discussion.

 

Payment Terms︰TT / LC / DP
Product Image


Related Products
cross-stitch photo frame 0.6-0.8 Mpa pneumatic nail angle machine
cross-stitch photo frame 0.6-0.8 Mpa pneumatic nail angle machine
US $ 1300
CNC automatic splint nail angle machine for frame
CNC automatic splint nail angle machine for frame
US $ 1300
GS-NAMV smart splint CNC photo frame joint nail angle machine
GS-NAMV smart splint CNC photo frame joint nail angle machine
US $ 1300
Automatic photo frame CNC corner nail machine with Splint
Automatic photo frame CNC corner nail machine with Splint
US $ 1300

Home  |  Product Catalog  |  Contact Us  |  Sitemap  |  Mobile Version
Powered by DIYTrade.com
HomeContact UsSitemap